The OBi LINK SYSTEM--AnyWhere Post can be attached to various gear. It attaches by either a bolt or a threaded stud. Once the AnyWhere Post is attached, you can connect it to any of the Locks in the OBi lineup.  

The AnyWhere Post can be attached to any webbing or fabric using a Phillips screwdriver to push a small hole through the material. Then use the included screws and flange washer to compress the fabric or webbing, and it is ready to use. 

The second way is to use an existing hole or drill a hole. Then use the included screws and flange washer to bolt the AnyWhere Post to your gear. 

The following way to attach the AnywWhere Post is to thread it into a 10-32 threaded hole or drill and tap a 10-32 hole in whatever you want to attach it to. 

The Clamp Lock bolts to any webbing from 1/2 inch to 1.5 inches. The Clamp Lock mounts to your backpack or belt strap. Once mounted to your backpack or belt, you can connect any round or square posts.

----NOTE---- You will need at least one Clamp Lock OR Slide Lock AND one RP M, QD P, or Anywhere Mount ----

The Clamp Lock with TEK-LOK attaches to your belt or 1.5-2.24-inch strap. Once attached to your backpack or belt, you can connect any round or square posts.  

The Grip On Round is excellent for connecting tripods and water bottles to your backpack or belt. The Grip On Round comes standard with a Round Plate, which mounts in any direction. The Grip On Round also comes with a 9-inch strap and will fit most binoculars, tripod legs, smaller cups/water bottles, and anything else you can find to attach. Attach the Grip On Round by loosening the strap until it fits around the gear, pull the strap snugly, then tighten the Allen bolt to the desired tension.

The Quick Detach Post or QD P is the family's most straightforward and toolless post. The QDP attaches to any flush cup, whether it is on your rifle, camera cage, or any other piece of kit you may want to connect to your backpack. Insert into the flush cup hole, depress the brass ball on the front with your thumb, and push. To remove, place the post between your forefingers, depress the brass ball, and pull out.

The Round Post M-lok or RPM mounts to the M-lok slot on the forend of your rifle stock or any other piece of gear with an M-lok slot or similar hole spacing. Once it is attached to your rifle or other equipment, it connects to any of the Lock or Grip On families.